Before you begin you will need the following tools: Pencil, Tape measure, hammer, nail set,
coping saw, miter saw (also known as miter box or chop saw), pneumatic finish nailer, air
compressor, enough air hose,work bench and a stud finder. If you need to you can rent these
at the local hardware store, alternatively if you don't mind really breaking a sweat you can
dispense with the power tools and do it by hand, git r dun !!!!You will also need 16 or 18
gauge pneumatic finish nails. I use the longest kind I can get usually 2 1/2 inches. Please
check back soon.
coping saw, miter saw (also known as miter box or chop saw), pneumatic finish nailer, air
compressor, enough air hose,work bench and a stud finder. If you need to you can rent these
at the local hardware store, alternatively if you don't mind really breaking a sweat you can
dispense with the power tools and do it by hand, git r dun !!!!You will also need 16 or 18
gauge pneumatic finish nails. I use the longest kind I can get usually 2 1/2 inches. Please
check back soon.
 | |  | |  | |  | |  | |  | |  | |  | |  |
 | |  | |  | |  | |  | |  | |  | |  |
molding", using crown molding blocks. If you do not know how to cut
crown molding this is the way to go, crown molding corners are always
the hardest !
crown molding this is the way to go, crown molding corners are always
the hardest !